Dr Piyush Tailor

---

---

DAILY MAINTENANCE

• 1.Go to diagnostic mode
• 2.Then periodic maintenance
• 3.Do daily maintenance
• 4.Use 70% isopropyl alcohol,DI water and one unused handkerchief from daily maintenance box
• 5.Perform all nine step and save it at the end.

HOW TO SEE NUMBER OF TEST REMAINING

1. Go to reagent menu
2. See the number of test remainning from count menu

HOW TO LOAD REAGENT

1. Go to reagent menu
2. click on load/unload button
3. and now load the reagent
4. Do not forget to close the reagent tray cover
5. And see the status of reagent -in use or current should be there
6. In case of bubble unload the reagent and again load it

HOW TO REMOVE EMPTY REAGENT

1. Go to reagent menu
2. Select the reagent you want to remove
3. And now click on load/unload button
4. Now remove reagent from reagent tray
5. Do not forget to close the reagent tray cover

HOW TO SEE SIGNAL REAGENT

1. Go to reagent menu
2. Click on view SR
3. And see the remaining asssay
4. If it is less the 100 test load new sr

HOW TO SEE UNIVERSAL WASH REAGENT(UWR) AND WASTE

1. Go to reagent manu
2. Click on view UWR/Waste
3. If UWR is less then 200ml then click on change both.
4. Put new UWR AND EMPTY WASTE

HOW TO PUT SAMPLE

1. Ready a sample tray
2. IF serum more then 1 ml then put barcoded vacutte
3. If serum less then 1 ml take sample in small vitros cup
4. If single test is there sample volume should be more then 300 microliter
5. For more then 1 test sample volume should be 500 microleter in vitrous cup
6. PUT sample tray
7. And start the green button

HOW TO SEE THE REMAINING TIME

1. Click on result menu
2. Click on update and see all sample has been taken or not
3. Yellow color in front of sample id indicate sample processing on

HOW TO SEE RESULT

1. Go to result menu
2. click on update
3. Click on plus sign(+) in front of sample id and see all result has came or not
4. In case of NA (no result) check the error message

HOW TO CHECK ERROR MESSAGE

1. Go to condition menu
2. see the error message and select it and click on view description
3. In that cause of error and it is solution is given