 | Dr Piyush B. Tailor |
| Be Human - Be Part of Change |
*Home
*Lectures
- Model Questions
- Question Papers
- Social Media
- About
Sidebar
nchsls:c:biochemistry:document:maintainence_of_zebra_tlp_2844_barcode_printer
Table of Contents
parts of barcode reader to be cleaned as shown in figure
How to clean printer head
- Switch of the printer first.
- Open the barcode printer by pulling two side levers towards the front of the printer.
- Release the ink ribbon and pull the 'ribbon complex' upwards so that Black portion can be visible.
- Swipe the head with a piece of tissue roll soaked in 70% isopropyl alcohol solution.
- Swipe only once in one direction,if another attempt is required than use new piece of tissue roll soaked in 70% isopropyl alcohol solution.
How to clean printer sensor
- Switch of the printer first.
- Open the barcode printer by pulling two side levers towards the front of the printer.
- Remove the barcode sticker roll and you will be able to see small black sensor area,as shown in image.
- Clean the sensor with a piece of tissue roll.(do not use 70% isopropyl alcohol solution.)
How to clean printer roller
- Switch of the printer first.
- Open the barcode printer by pulling two side levers towards the front of the printer.
- Black coloured printer roller will be visible as shown in image.
- Swipe the roller head with a piece of tissue roll soaked in 70% isopropyl alcohol solution.
- Swipe only once in one direction,if another attempt is required than use new piece of tissue roll soaked in 70% isopropyl alcohol solution.
- Close the printer by pressing the coverlock inside as shown in image and tick sound will be heard when printer close.
nchsls/c/biochemistry/document/maintainence_of_zebra_tlp_2844_barcode_printer.txt · Last modified: 2022/08/13 07:34 (external edit)
