PIPETTING STEPS:
◦ Press the operating button to the first stop.
◦ Dip the tip attached to the pipette in to the solution to a depth of about 1 cm and slowly release the operating button. Wait for a while, and then withdraw it from the liquid touching it against the edge of the reservoir to remove excess liquid adhering to the outer surface of the tip.
◦ Dispense the liquid in to the receiving vessel by gently pressing the operating button to the first stop. After a second, press the operating button to the second stop. This will empty the tip completely. Remove the pipette from the vessel, sliding it up the wall of vessel.
◦ Release the operating button to the ready position.