SWITCH ON PROCEDURE:
• First switch on the main power supply.
• Switch on the incubator to start it.
- The incubator has a thermostat to adjust temperature 370 C.
• Place the samples for appropriate time.

Note: - Do not switch off the incubator.
SWITCH OFF PROCEDURE:

• Only in case of maintenance or break down Incubator shall be switch off.
• Switch off the main power supply.
• Then remove the plug from main power supply pin.

Maintenance:
The incubator is cleaned weekly and after spillage of infectious material. The interior of the incubator is cleaned using sterile cotton or gauze soaked in 70% Alcohol/ 5 % Lysol. After cleaning, the interior is allowed to dry completely.