Put the power cable to socket.

Turn on Switch.

Open the lid of centrifuge.

Load the rotor with its components of tubes/ Vacutainer.

Close the lid of Centrifuge.

Move speed control knob clockwise from “0’ position.

To stop move speed control knob to “0’ position.

Centrifuge de-accelerates.

Open the centrifuge lid.

Remove tubes/vacutainer

MAINTENANCE SCHEDULE

• If there is any spillage, wipe and disinfect immediately with freshly prepared (within 8 hrs.) 1 % Sodium hypochlorite. Let the hypochlorite in the bucket for 1 hr. After 1 hr, invert buckets to drain dry. Clean and Wipe.
• In case of breakage of any test tube samples, immediately switch off the instrument ,open it , take it out all braked particles with gloved hands and then wipe and disinfect immediately with freshly prepared

(within 8 hrs.) 1 % Sodium hypochlorite. Let the hypochlorite in the bucket for 20 minutes. After 20 minutes, invert buckets to drain dry.

• Clean and Wipe again.