DAILY MAINTENANCE
- 1.Go to diagnostic mode
- 2.Then periodic maintenance
- 3.Do daily maintenance
- 4.Use 70% isopropyl alcohol,DI water and one unused handkerchief from daily maintenance box
- 5.Perform all nine step and save it at the end.
HOW TO SEE NUMBER OF TEST REMAINING
- Go to reagent menu
- See the number of test remainning from count menu
HOW TO LOAD REAGENT
- Go to reagent menu
- click on load/unload button
- and now load the reagent
- Do not forget to close the reagent tray cover
- And see the status of reagent -in use or current should be there
- In case of bubble unload the reagent and again load it
HOW TO REMOVE EMPTY REAGENT
- Go to reagent menu
- Select the reagent you want to remove
- And now click on load/unload button
- Now remove reagent from reagent tray
- Do not forget to close the reagent tray cover
HOW TO SEE SIGNAL REAGENT
- Go to reagent menu
- Click on view SR
- And see the remaining asssay
- If it is less the 100 test load new sr
HOW TO SEE UNIVERSAL WASH REAGENT(UWR) AND WASTE
- Go to reagent manu
- Click on view UWR/Waste
- If UWR is less then 200ml then click on change both.
- Put new UWR AND EMPTY WASTE
HOW TO PUT SAMPLE
- Ready a sample tray
- IF serum more then 1 ml then put barcoded vacutte
- If serum less then 1 ml take sample in small vitros cup
- If single test is there sample volume should be more then 300 microliter
- For more then 1 test sample volume should be 500 microleter in vitrous cup
- PUT sample tray
- And start the green button
HOW TO SEE THE REMAINING TIME
- Click on result menu
- Click on update and see all sample has been taken or not
- Yellow color in front of sample id indicate sample processing on
HOW TO SEE RESULT
- Go to result menu
- click on update
- Click on plus sign(+) in front of sample id and see all result has came or not
- In case of NA (no result) check the error message
HOW TO CHECK ERROR MESSAGE
- Go to condition menu
- see the error message and select it and click on view description
- In that cause of error and it is solution is given
