Table of Contents
Print label from LIS
- Open 12.207.3.240
- Enter your user name and password.
- Click on Misc—–> Label.
- Following screen will be seen.
- Click on sample tube barcode.
- Following screen will be seen.
- Write sample IDs for which you want to print barcode.
- Then click on print small barcode.
- Download these barcodes from barcode printer and use accordingly where needed.
Print 4 line label from LIS
- Open 12.207.3.240
- Enter your user name and password.
- Click on Misc—–> Label.
- Following screen will be seen.
- Click on 4 line barcode.
- Following screen will be seen.
- Write down the data that you want to print on barcode.
- Click on Print label.
- Following screen will be seen.
- Download these barcodes from barcode printer and use accordingly where needed.
4 Line Label Help
- If Barcode is tick marked, that perticular line will be barcoded –> Barcode:
- If Range is selected, that perticular line will have data^X printed –>Range:
- If Range (from and to) is given, incremental line^X will be printed
- Line following barcode will be ignored to accomodate barcode
Special instructions for using Ricoh MP-2000L printer for printing labels
- After reagent label is ready to print,take out 48×24 mm A4 size labels.
- First take out all the empty papers from printer tray.
- Put labels in the printer tray as described below.
- Set the length and width of the tray according to size of paper.
- Make sure that print dialogbox shows Page handling→page scaling→None
