New Instructions for 64 bit

  1. login as root
  2. Download for 64 bit
  3. Extract. It will be extracted in a folder called 'elisa'
  4. It may be in /root/Downloads or in /root/
  5. Start terminal. go to in the elisa folder
    1. example command to go to elisa folder
      1. cd /root/elisa
      2. cd /root/Downloads/elisa
    2. Run command 
      ./elisa_reader
    3. If your elisa folder is in /root, give “ls -l” command. Following will be seen.
      root@debian:~/elisa# ls -l
total 40
-rwxr-xr-x 1 root root   941 Aug 19 16:39 elisa.reader
-rw-r--r-- 1 root root    89 Aug 19 16:42 help.txt
-rwxr-xr-x 1 root root 32448 Aug 19 16:37 rs232
root@debian:~/elisa# 
    -

Old instructions ofr 32 bit

  1. Download for 32 bit
  2. Copy the “sjinn.zip” file in Home folder.it will be seen in “download” folder.
  3. Extract the zip file in home folder.For biochemistry users,it is /home/biochemistry.Now “elisa.reader.new” can be seen in home folder (/home/biochemistry).
  4. Now do the following in terminal as seen in below screenshot:
  5. Now is “rs232” installed .close the terminal.
  6. Go to home folder . Right click on “elisa.reader.new” file and go to permissions and tickmark over “Allow executing file as program” or run following command in terminal:Step 1
  7. Now open the terminal.
  8. For log in as root, Write command as shown in below window —→ press enter —> write password for root.
  9. Type command “./elisa.reader.new” .Step 2
  10. If above shown window seen then your elisa reader is installed correctly.
  11. Test run to see that the plate moves via commands from the software.