electrolyte_pack_preparation_mops_hepes.ods|Preparation of electrolyte pack(Erba Xl-640)}}

1. 1000 ml volumetric flask
2. Funnel
3. 2 Glass bowl
4. 500 microliter pipette

1. Put Nacl and Kcl in Glass bowl.Put Glass bowl in Hot air oven at 175'c for 1 hour.(To evaporate water present in Nacl and Kcl)
2. Take out Glass bowl carefully with holder or handkerchief.(To prevent injury to ourself).

1. Weight following chemicals in given volume and mix in plastic container
2. 8.123 gm of Nacl
3. 0.298 gm of Kcl
4. 0.065 gm sodium azide
5. Make such 10 cups and preserve in 2-8 degree temperature

1. Take 600ml DI water in 1000ml volumetric flask and add contains of preprepared dry chemicals fron plastic cups.
2. Add 36.95 ml of Lithium carbonate stock solution(1 gm/L) in volumetric flask.
3. Mix well and make sure that all chemicals are completely dissolved.
4. Make upto 1 liter with fresh DI water.
5. Record data in inventory management section of LIS

- Weight following chemicals in given volume and mix in plastic container

1. 4.032 gm of Nacl
2. 0.596 gm of Kcl
3. 0.065 gm sodium azide
4. Make such 5 cups and preserve in 2-8 degree temperature

1. Take 600ml DI water in 1000ml volumetric flask and add contains of preprepared dry chemicals fron plastic cups.
2. Add 14.78 ml of Lithium carbonate stock solution(1 gm/L) in volumetric flask.
3. Mix well and make sure that all chemicals are completely dissolved.
4. Make upto 1 liter with fresh DI water.
5. Record data in inventory management section of LIS

1. Weight 1 gm lithium carbonate and add it into approximately 600 ml water into volumetric flask.
2. Make upto 1 liter with fresh DI water.

1. After making electrolyte reagent , Take old and new A and B 0.5 ml in 4 ependroff cups..
2. Measure electrolyte in all 4 cups.
3. Store data in “10.207.3.240/NCHSLS/c/001 Biochemistry/Records/009 Internal Quality Control Records/Electrolyte QC check”.

1. Take ammonium biflouride powder bottle from refrigerator.Open only in presence of Head of department as it is very harmful chemical.
2. Dont use any glass containers for making ammonium biflouride stock solution as ammonium biflouride erodes the glass.
3. Take 500 ml DI water in 500 ml glass volumetric flask(as we dont have plastic 500ml volumetric flask and we are using this flask for measuring DI water and rest of the procedure done in plastic beaker) and take out 21.5 ml DI water with 10 ml graduated pipette with pipetter.
4. Add remaining DI water of 500 ml volumetric flask in 1 liter of plastic beaker.
5. Add 21.5 ml 10% HCL(35% W/W, Density=1.18 , MW=36.46) in 1 liter of plastic beaker.
6. Add 1.425 gms ammonium bifluoride(MW=57.0) in 1 liter of plastic beaker and dissolve it by tip of 500 ul pippette.
7. This is stock solution of 0.05N ammonium bifluoride+0.05N Hcl.
8. Fill 15 ml DI water in 15 ml plastic reagent bottle with 10 ml greduated pipette with pipetter.and note the mark on that bottle.Use this mark as reference for filling other bottles with ammonium biflouride stock solution.
9. Fill approximately(as described above) 15 ml of this solution in 15 ml reagent plastic bottle directly from 1 liter of plastic beaker.
10. Make such 32-35 bottles
11. reagent expiry is up to 1 year.
12. Record data in inventory management section of LIS

1. Take 0.420 gms Pepsin(1:10000) powder in each eppendroff cups and make 30 such cups.seal with parafin film.
2. Put pepsin eppendroff cups and 15 ml bottles of ammonium biflouride stock solution in box and paste instruction on the box.

1. Mix 1 eppendroff cup of pepsin powder in 15 ml bottle of ammonium biflouride stock solution

1. Take fibrin clot ( from PT tube/ clotted sample) .
2. Take 2 small fibrin clots in 2 different glass tubes.
3. Add 0.5 ml di water in 1 glass tube. This is control.
4. Add 0.5 ml pepsin in another glass tube . This is test sample.
5. Gently mix for 5 minutes at room temperature.
6. If clot dissolve in test glass tube and not in control sample then Pepsin is active.

1. whenever first bottle of new lot is opened.
2. Store your observation in LIS reagent management table in “Detail” field.

==new std a and b preparation by Dr.Nikunj, of MOPS and HEPESelectrolyte_pack_preparation_mops_hepes.ods and good ise reagent reference entry good_ise_buffer_ep0341793a2.pdf

RUNNING A COMPARISON FOR A FRESHLY PREPARED STD A AND STD B

1. use 2 cups each from the purchased pack of std a and b respectively each time while running a comparison of new freshly prepared std a and b with the on going(in use) std a and b