=====33. WDI FOR MGG STAIN=====

**Staining Procedure:**

  * Take test slide on which staining has to be performed along with positive control.
  * Deparaffinize section by keeping in oven for 5min and clear it with 2 changes of xylene each for 15 minute xylene.
  * Dehydrate section with graded alcohol 2 changes each for 2 minutes.
  * Bring section to distilled water.
  * Dilute the MGG stain with buffer (1:10). Apply the stain over the slide for 5 minute.
  * Remove the stain from smear.
  * Dilute the Giemsa stain with tap water (1:4).
  * Apply the stain over the slide for 15-20 minutes.
  * Wash with tap water.
  * Dehydrate in alcohol, clear in xylene, mount with DPX
  * Label it properly