=====MANAGEMENT OF SPILLS OR ACCIDENTS OF BLOOD / INFECTIOUS MATERIAL IN THE LABORATORY=====
**PROCEDURE**
  *In case of spills or accidents the following steps are essential and to be followed

            Wear gloves
                 ⇓
     Cover the spillage with paper towel/absorbent material
                 ⇓
      Pour hypochlorite 1%
                 ⇓
         Leave for 30 min 
                 ⇓     
            Clean the area

  *Wipe the surface with disinfectant again and mop up to leave a clean area.
  *Place the absorbent material in the yellow biohazard bag meant for infectious waste.

**ESSENTIAL REQUIREMENTS**
  *Gloves to be worn, avoid direct contact of gloved hand with spill.
  *Sweep broken glass/fractured plastic with dustpan and brush.
  *Needle stick or other puncture wounds, cuts and skin contaminated with spill should be washed with soap and water, do not squeeze or do not apply spirit. 
  *Report immediately.
  *Maintain the record.

**CONTENTS OF SPILL KIT**
  *Gloves, Gauze piece
  *Mask, Cotton
  *Sodium Hypochlorite, Plastic Bottle