====WDI OF INCUBATOR====

SWITCH ON PROCEDURE:\\
• First switch on the main power supply.\\
• Switch on the incubator to start it.\\
- The incubator has a thermostat to adjust temperature 370 C.\\
• Place the samples for appropriate time.\\

Note: - Do not switch off the incubator.\\
SWITCH OFF PROCEDURE:\\

• Only in case of maintenance or break down Incubator shall be switch off.\\
• Switch off the main power supply.\\
• Then remove the plug from main power supply pin.\\

**Maintenance:**\\ 
The incubator is cleaned weekly and after spillage of infectious material. The interior of the incubator is cleaned using sterile cotton or gauze soaked in 70% Alcohol/ 5 % Lysol. After cleaning, the interior is allowed to dry completely.