====WDI OF ELITE PRO (INSTRUMENT)====

===WDI OF PT===
• Switch on the main power supply.\\
• Switch on the ELITE Pro switch.(Back side of machine)\\
• Switch on the monitor.\\
• Monitor will display starting ACL, please wait and then system load in progress.\\
• For log in enter user and password.\\
• Database view appears on screen.\\
• Menu contains: ‘Analysis’ ‘QC’ ‘Calibration’ ‘Diagnostic’ ‘Setup’ ‘utility’\\ 
• Select option ‘Diagnostic’ then moves to maintenance and everyday change cleaning cycle date.\\
• Select option ‘Diagnostic’ then moves to cleaning and start.\\
• After completion of  cleaning select ‘Analysis’ and move to multitest session\\
• Multitest  preanalysis displayed on monitor then click on circle (Number) and enter sample ID then select test like PT or APTT then confirm test.\\
• Daily controls are run first.\\
• Then for second sample just like first sample select position and enter sample ID\\
• After loading all samples click on  box then press on ‘RUN’.\\
• Then monitor  will display ‘Pre Analysis in progress’ then pre analysis result control pannel  is displayed then select ‘Continue’.\\
• Samples are tested automatically. Results are displayed on screen.\\
• After completion select cleaning and in last shut down.\\


===WDI OF APTT===
• Switch on the main power supply.\\
• Switch on the ELITE Pro switch.(Back side of machine)\\
• Switch on the monitor.\\
• Monitor will display starting ACL, please wait and then system load in progress.\\
• For log in enter user and password.\\
• Database view appears on screen.\\ 
• Menu contains: ‘Analysis’ ‘QC’ ‘Calibration’ ‘Diagnostic’ ‘Setup’ ‘utility’ \\
• Select option ‘Diagnostic’ then moves to maintenance and everyday change cleaning cycle date.\\
• Select option ‘Diagnostic’ then moves to cleaning and start.\\
• After completion of cleaning select ‘Analysis’ and move to multitest session.\\
• Multitest  preanalysis displayed on monitor then click on circle (Number) and enter sample ID then Select test like PT or APTT then confirm test.\\
• Daily controls are run first.\\
• Then for second sample just like first sample select position and enter sample ID.\\
• After loading all samples click on  box then press on ‘RUN’.\\
• Then monitor will display ‘Pre Analysis in progress’ then pre analysis result control pannel  is displayed then select ‘Continue’.\\ 
• Samples are tested automatically. Results are displayed on screen.\\
• After completion select cleaning and in last shut down (Screen & monitor ) and switch off (backside of machine).\\



        
**Maintenance:**\\
• Cleaning cycle - Everyday\\
• Rinse Waste Reservoir - Weekly\
• Clean Optical Sensors & Windows – Every 14th day\\
• Clean Air Filter – Every 28th day\\