====Special Instructions for COVID19 Samples (For Lab Technicians)====
  -This instructions are relevant for non-covid19 samples,too
  -There are two types of MRD numbers for COVID19 samples
    - Example1: 05/123 (Where 05 is month)
    - Example2: SUR/20/00123456 (8 digits mandatory)

  -Example1:
    - 05/123
    - If such samples are received, use __**New Covid(Stem)**__ in menu
    - Do not enter 0 (enter 5/123)
  -Example2:
    - SUR/20/00123456
    - If such samples are received, use __**New Covid(MRD)**__ in menu
    - If MRD is 123456          => write SUR/20/00123456 in LIS
    - If MRD is 23456           => write SUR/20/00023456 in LIS
    - If MRD is SUR/20/00002345 => write SUR/20/00002345 in LIS
    - If MRD is different in BOOK vs REQUEST-FORM vs SAMPLETUBE, send sample back for correction

  *Note: If there is insufficient space for Barcode sticker on LABBOOK, stick them on fresh new page to prevent sticking over written details
====Special Instructions for COVID19 Samples (For Clinicians)====
  -There are two types of MRD numbers for COVID19 samples
    - Example1: 05/123 (Where 05 is month)
    - Example2: SUR/20/00123456 (8 digits mandatory)

  -Example1:
    - 05/123 => write only 5/123.
    - Do not write 0

  -Example2:
    - SUR/20/00123456
    - Do not write 123456   => write SUR/20/00123456
    - If MRD is different in BOOK vs REQUEST-FORM vs SAMPLETUBE, __**Sample will be sent back for correction**__
    - Use Lables on Tubes , Request Forms and Request Books as far as possible
    - In Lab Book(Request BOOK) keep gap of 2 inch between consecutive sample entry for sticking barcodes